Air cooled heat exchanger advantages

- May 12, 2018-

When it comes to air cooled heat exchangers, it is bound to make people think of another corresponding water-cooled heat exchanger. There is a clear distinction between the two. The first is that the medium used for the heat exchanger is different. The former is air and the latter is water. Secondly, their structures are also different. In contrast, the structure of the air-cooled heat exchanger is simpler; Different aspects.


After continuous research and improvement, the air cooled heat exchanger adopts a vertical full-closed twin-screw compressor, as well as a unique sound-proof room design, which effectively reduces the noise of the unit; the air-cooled heat exchanger adopts "V" type structure, so the length is short, the gap is large, improve heat transfer efficiency.


In the actual work process, the air-cooled heat exchanger utilizes the blower to generate enough air volume and the best temperature for cold air, thereby increasing the production efficiency and improving the product quality. And the whole process is environment-friendly, energy-saving, easy to maintain, and low in operating costs.


The compact air-cooled heat exchanger has a large heat-dissipation area, and it also greatly promotes the heat exchange efficiency. The equipment can be used for the system's return oil cooling and drain cooling due to its long service life and high working pressure. And independent cycle cooling.


Safety is also outstanding in air cooled heat exchangers. In the event of a cooler breakage, it will not cause oil and water mixing like water heat exchangers, causing fatal damage to the hydraulic system. In contrast, hydraulic motor-driven air-cooled heat exchangers do not require a power source and only need to be connected to a hydraulic system, especially for walking machines.


According to the current technology, the applicable fluid temperature of the air-cooled heat exchanger is 10°C-180°C, and the applicable ambient temperature is 40°C-100°C; the normal working pressure is 2.0MPa; the maximum working pressure is designed according to the user's needs 5MPa , Can meet a variety of vehicle requirements, mainly for a variety of environmental sanitation vehicles, road machinery, truck cranes and other equipment designed to use low voltage.