Full aluminum automotive radiator softening treatment and water injection requirements

- Jul 02, 2018-

Full-aluminum automotive radiators should not be exposed to any acid, alkali, or other corrosive properties during use. Full-aluminum automotive radiators are recommended to use soft water. Hard water must be softened before use to avoid internal blockage of radiators. Scale production.

Full aluminum automotive radiators can use their antifreeze to a certain extent, so that it can effectively avoid the corrosion of its radiator to a certain extent. Please be sure to use the long-term rust-proof antifreeze produced by the regular manufacturers and in line with national standards. During the instFullation of the heat sink, please do not damage the heat-dissipation belt (chips) and damage the heat sink to ensure heat dissipation and sealing.

When the interior of the aluminum radiator is completely filled with water and then filled with water, the water release switch of the engine block must be turned off first, and when the water flows out, it is closed again to avoid blisters. Check the water level at any time during daily use, add water after cooling down. When water is added, slowly open the water tank cover. The operator's body should be as far away from the water inlet as possible to prevent the high-pressure steam from being sprayed from the water inlet to cause burns.