* Thickness of new type radiator fin is 0.3MM, and it is water corrugated type ,which has greater strength. Tube thickness is 0.6mm- 0.8mm, which is 2-3 times of original type . so there is no need to worry about pumping .
* The thickness of new radiator fin is 2-3 times that of the tube-fin type, which can resist the impact of the stones in the vehicle work.
* When the surface of the radiator is covered with dust and dirt, it can be directly washed with a high pressure water gun. There are some hair and dust that are difficult to remove, and even the surface of the radiator can be sprayed with an alcohol lamp.
* The new radiator is made of high strengty aluminum alloy, which has an absolute advantage over the traditional type in terms of cost.
* Because the new radiator has a solid structure, there is no need to install a middle room. Under the same volume, cooling capacity area is larger, which invisibly reduce the cost.
* Power from 50KW to 1500KW
* Radiator Maximum Size : 3000*3000*3000(mm)
* Products include: excavators, loaders, bulldozers, mining vehicles, etc
* Product advantages: The shock resistance is particularly outstanding, and the radiator can withstand pressure of 7 MPa.
The body heat dissipation structure, outstanding heat dissipation performance, the wall thickness of the heat pipe is 5 ti mes that of the ordinary water tank, the advantages of shock and torsi on resistance are obvious, and the product life is increased by 120%.